The 9 Things Your Parents Teach You About Fiat Panda Key Fob Replacement
Reasons Your fiat punto replacement key 500 Key Fob Won't Work
A key fob from Fiat 500 allows you to easily open doors and start your car. There are a myriad of reasons why the fob may stop working. This could be due to a dead coin battery damage to the receiver module, water issues, and interference.
This listing is for a NEW replacement Fiat Panda key fob replacement Flip Key Remote that appears similar to the Ilco brand. It must be professionally programmed (click here to search for local locksmiths for automotive locksmiths). It includes trunk, lock and unlock buttons.
Dead Coin Battery
The most common reason your 500 key fob will not function is due to a dead battery. Modern key fobs come with a limited operating range, and should be within a few feet of the vehicle to function. If you're far from your vehicle and you press the key fob button the car won't be able to respond, and will display a "Key Fob Not Detected" message in the instrument cluster.
If this happens, replace the coin cell battery (Part number CR2032) by a new fiat 500 key fob one from a trusted brand such as Panasonic, Duracell, or Energizer. You can usually find them in your local hardware store or on the internet.
You can test the coin-cell battery by pressing the buttons while you are standing close to your fiat doblo key replacement 500. The parking lights should blink and the key fob will operate the lock and unlock switches.
If the fob's remote doesn't function after replacing the battery, it may be damaged by water, which prevents it from connecting to the receiver module in your vehicle. Water damage can happen in a variety of ways, from a light splash to submerging the fob in salt water at the beach. If you suspect your fob has been exposed to water, try placing it in a dry rice bag to draw the moisture out. If this doesn't work, your fob will probably require reprogramming by a professional auto locksmith or by the dealer.
Water Damage
Water damage can occur if you immerse the fob in the ocean or wash it in a machine. Saltwater can cause the circuit board to become shorted and eventually fail. It's not a good thing to soak the fob in water however, but don't give it up in the event that you accidentally drop it in the water or don't take it out of your pocket.
First, remove the battery. Before replacing the battery, clean the electronic chip with isopropyl or similar products. Check the fob again to verify if it's working. If the key doesn't function it could need to be changed. This is usually handled by an auto locksmith or dealer.
If your key is a bit older and not programmed for your car it is necessary to replace it completely. This is a straightforward process that can be handled by a professional automotive locksmith. The locksmith needs to cut the key to match the ignition of your vehicle. They'll also have to reprogram the fob to your car's system. This is a fast and affordable process which can be completed in the next day.
Receiver Module Issues
One of the main reasons your 500 key fob may stop functioning is that it's out of range. The remote usually has 30 feet of range or less, and if it's too far from your vehicle, it won't respond to your commands. This can be fixed by moving closer to your vehicle until it begins responding.
If you've replaced the battery in your coin (commonly called a "button" or "watch") and your fob still won't work, it could have an internal circuit board issue. In most cases, reprogramming the fob will solve the issue. You can find directions on how to do this for most vehicles by searching YouTube or reading the owner's manual.
It may be necessary to replace the metal clips that hold the coin batteries in their place. If they lose tension it could prevent the battery from sitting properly, and this will result in the malfunction of your remote.
In rare instances, the fob may be out of the vehicle's sync because of hardware or software issues. You can fix this issue by visiting your local dealer or auto-locksmith to reprogram your key fob. In certain instances it may be necessary to reinstall the program in your body control module, as well.
Interference
In addition to a dead battery on a coin, the key fob may not be able to receive or transmit the signal due to interference. This is possible when the key fob is close to an electronic radio transmitter (cell phones, radar detectors) or any other source of electromagnetic radiation. Other reasons why the key fob might not function include a poor connection to the buttons or damage to the internal chip, or water damage.
If your key fob suddenly stopped working, or you've tried everything at home to fix it (e.g. It could be a defective 500 receiver module in the event that you've tried replacing the battery, reprogramming or using an alternative key fob. The receiver module, which is located under the dashboard, detects radio frequency signals from your key fob. It transforms the signals into electronic commands which are then read by the vehicle.
Fortunately, there's an easy method to reset all of the onboard systems in your 500 device, including the key fob. Disconnect the battery 12 volt for about 15 minutes, by disconnecting the negative cable first then the positive cable. Reconnect the battery. This will clear out any residual electricity and restart the car's computers. This could allow you to the key fob to function again. If the issue continues, you should speak with an expert technician. They can identify the root cause of any issues.